Problem | Troubleshooting | Possible Solution | ||
Possible Cause |
| |||
• | Unit will not start. | • Cord not plugged in. | • Plug appliance into a working outlet. | |
|
| • Circuit fuse is blown. | • Replace circuit fuse. (If the product | |
|
|
| repeatedly causes the circuit fuse to | |
|
|
| blow, discontinue use immediately and | |
|
|
| have it serviced at a Black & Decker | |
|
|
| service center or authorized servicer.) | |
|
| • Circuit breaker is tripped. • Reset circuit breaker. (If the product | ||
|
|
| repeatedly causes the circuit breaker to | |
|
|
| trip, discontinue use immediately and | |
|
|
| have it serviced at a Black & Decker | |
|
| • Cord or switch is | service center or authorized servicer.) | |
|
| • Have cord or switch replaced at Black | ||
|
| damaged. | & Decker Service Center or Authorized | |
• | Cutting line is consumed • Edging too far from | Servicer |
| |
• Ensure edging wheel is on the edge of | ||||
| quickly in edge mode. | edge of sidewalks or | the surface and the cutting line is positioned | |
|
| abrasive surfaces. The | in the grass or dirt area to be edged not | |
|
| cutting line is hitting the | the sidewalk or other abrasive surface. | |
|
| sidewalk or abrasive surface. |
|
|
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
Maintenance
WARNING: Disconnect the plug from the power source before performing any maintenance.
CAUTION: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
1. Keep the air intake slots clean to avoid overheating.
2. Your trimmer line can dry out over time. To keep your line in top condition, store spare pre- wound spools or bulk line in a plastic, sealable bag with a tablespoon of water.
3. Plastic parts may be cleaned by using a mild soap and a damp rag.
4. The line cutter on the edge of the guard can dull over time. It is recommended you periodically
Service Information
All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways. The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges. The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under
free warning label replacement: If your warning labels become illegible or are missing, call
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country specific warranty information contained in the packaging, call the local company or see the website for warranty information.
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
9
