Black & Decker HJ28 warranty Care and Cleaning, Storage, Need Help?

Care and Cleaning

1.Always unplug the unit before cleaning or when not in use.

2.Rinse the Strainer/Reamer immediately after use. Use a bristle brush to remove fine pulp that may remain.

3.Use hot, sudsy water to wash the Cover, Reamer, Strainer, and Pitcher or place these parts in a dishwasher — top rack ONLY. Wipe the Base with a damp cloth or sponge.

4.Although you don’t have to remove the Reamer from the Strainer to clean it, you may take it off by simply turning over the Strainer and lightly pressing the tabs at the bottom of the Reamer. The Reamer will pop out. Replace the Reamer by gently snapping it into the Strainer opening. Be sure the Stirrers on the Reamer are on the top surface of the Strainer.

Storage

1.Unplug the unit, press the Lock Tab in, and lift the compartment cover off. Store the cord in the hidden compartment located in the underside of the Base. Allow approximately 6 inches (15cm) of the cord to drape from one of the notches at either side of the compartment before replacing the compartment cover.

2.Assemble and replace all parts. Use the Dust Cover to keep the unit clean. Line up the arrow on the Dust Cover with the arrow on the Strainer Tab so that the Cover drops into place.

Need Help?

Service, if necessary, must be performed by a Black & Decker Company-Owned or Authorized Household Appliance Service Center. The Service Center nearest you can be found in the yellow pages of your phone book under “Appliances – Small – Repairing.”

If mailing or shipping your juicer, pack it carefully in a sturdy carton with enough packing material to prevent damage. Include a note describing the problem to our Service Center and be sure to give your return address. We also suggest that you insure the package for your protection.