POLARIZATION PLUGS

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If is still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

Assembly

WARNING: Make sure that the appliance is switched off and unplugged.

Attaching the accessories for vacuuming (fig. B)

The accessories provided can be used in various combinations, depending on the task: a. General vacuuming / dusting

b. Vacuuming in confined spaces

c. Vacuuming upholstery or in corners

To attach, insert the appropriate accessory into the front of the appliance as shown.

Attaching the crevice tool for blowing (fig. C)

WARNING: When using the appliance for blowing purposes, wear eye protection. Keep the air intake free from obstructions to prevent the motor from overheating. Do not point the air outlet at yourself, bystanders or animals.

To attach the crevice tool:

•Turn the exhaust filter cover (7) counterclockwise to remove it from the appliance.

•Remove the filter (8) from the appliance.

•Insert the crevice tool (4) into the opening. Make sure that it fits snug against the rear of the appliance.

Turbo brush accessory (HV9000P ONLY)

WARNING: Injury to pets. Do not use directly on animals.

CAUTION: Keep hair, loose clothing and all parts of body away from rotating brush. Your Hand Vac is supplied with an air driven Turbo Brush.

In order to maximize air suction when using the air driven turbo brush:

•Empty the dirt bowl frequently.

•Keep the filter clean (see “Cleaning the dust bowl and filter”).

•Keep the turbo brush free of hair and dirt (see “Cleaning the turbo brush”).

To attach turbo brush, insert brush adapter directly into the nozzle as shown in figure A1 or attach turbo brush to extension hose then to nozzle.

Note: Make sure accessory is securely attached before use.

Cleaning the turbo brush

First remove the turbo brush from the unit. Press the button on the front of the brush and lift the top off. There may be some hair, dust, lint, etc. on the turbine wheel and or brush. Remove as much of this as possible. Once cleaned replace the top and snap back in place

(see figures E1, E2 and E3).

 

immediately and have it

 

serviced at a Black &

 

Decker service center or

 

authorized servicer.)

• Cord or switch is damaged.

• Have cord or switch

 

replaced at Black &

 

Decker Service Center or

 

Authorized Servicer.

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

Accessories

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:

1-800-544-6986

WARNING: The use of any accessory not recommended for use with this tool could be hazardous.

Service Information

Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the

Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986.

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under "Tools–Electric" in the yellow pages of the phone directory.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

Free warning label replacement: If your warning labels become illegible or are missing, call 1-800-544-6986for a free replacement.

Operation

WARNING: Before connecting to the power supply, make sure that the appliance is switched off.

Switching on and off

•To switch the tool on, set the on/off switch (3) to position I.

•To switch the tool off, set the on/off switch (3) to position O.

WARNING: Make sure the accessories are securely attached before switching on. Keep a firm grip on the appliance when switching on and during use.

Motor thermal safeguard

The motor of the appliance contains a thermal safeguard. This device automatically switches the appliance off in case of overheating. If this occurs, proceed as follows:

•Switch the appliance off and remove the plug from the wall socket.

•Allow the unit to cool. When the unit has cooled down, check and clean the filters.

•Re-insert the plug into the wall socket and switch the appliance on.

Cleaning the dust bowl and filter (fig. D)

WARNING: Make sure that the appliance is switched off and unplugged. When the dust bowl is full or the filters are clogged, empty the bowl and clean the filters. The filters are re-usable and should be cleaned regularly.

•Press the dust bowl release button (2) and remove the dust bowl (1).

•Remove the filter (6) from the dust bowl

•Brush any loose dust off the filter.

•Remove any dust from the dust bowl.

•Wash the filter in warm, soapy water. The bowl and the filter holder can also be washed if necessary. Do not immerse the appliance in water.

•Make sure the dust bowl, filter holder and filter are completely dry.

•Refit the filter and the filter holder.

•Refit the dust bowl onto the appliance,making sure the dust bowl clicks into place.

To clean the exhaust filter, proceed as follows

•Turn the exhaust filter cover (7) counterclockwise to remove it from the appliance.

•Remove the filter (8) from the appliance.

•Wash and dry the filter as described above.

•Refit the filter and replace the exhaust filter cover. Turn the cover clockwise to lock in position.

CAUTION: Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters and an empty dust bowl. If dust begins to fall

back out of the appliance after switching it off, this indicates that the dust bowl is full and must be emptied.

Replacing the filters

The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (cat. no. HVF90).

•Remove the old filters as described above.

•Fit the new filters as described above.

Storage

•Wrap the power supply cord around the appliance.

•Store the appliance and the attachments in a dry location out of the reach of children.

Cleaning/Maintenance

WARNING: Before cleaning and maintenance, switch the appliance off and unplug it.

From time to time wipe the appliance with a damp cloth. Do not use any abrasive or solvent-based cleaner. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

Problem

TROUBLESHOOTING

 

Possible Cause

Possible Solution

• Unit will not start.

• Cord not plugged in.

• Plug tool into a working

 

 

outlet.

Imported by

See ‘Tools-Electric’

Black & Decker (U.S.) Inc.,

701

E. Joppa Rd.

– Yellow Pages –

Towson,

MD 21286 U.S.A.

for Service & Sales

ASPIRATEUR-SOUFFLEUR PORTATIF

AVEC CORDON D´ALIMENTATION

MODE D’EMPLOI

N° de catalogue

HV9000, HV9000P

MERCI D’AVOIR CHOISI BLACK & DECKER !

VISITEZ WWW.BLACKANDDECKER.COM/NEWOWNER

POUR ENREGISTRER VOTRE NOUVEAU PRODUIT.

AVANT DE RETOURNER CE PRODUIT POUR QUELQUE

RAISON QUE CE SOIT, COMPOSER LE

1-800-544-6986

AVANT D’APPELER, AYEZ EN MAIN LE N° DE CATALOGUE ET LE CODE DE DATE. DANS LAPLUPART DES

CAS, UN REPRÉSENTANT DE BLACK & DECKER PEUT RÉSOUDRE LE PROBLÈME PAR

TÉLÉPHONE. SI VOUS AVEZ UNE SUGGESTION OU UN COMMENTAIRE, APPELEZ-NOUS. VOS

IMPRESSIONS SONT CRUCIALES POUR BLACK & DECKER.

Pour l´achat d´un filtre de rechange (HVF90), composer le 1-888-678-7278.

CONSERVER CE MANUEL POUR UN USAGE ULTÉRIEUR.

IMPORTANTES MESURES DE SECURITE

Lorsqu'on utilise des outils électriques, il faut toujours respecter certaines mesures de sécurité, notamment suivantes.

LIRE ET COMPRENDRE TOUTES LES DIRECTIVES AVANT D’UTILISER L’APPAREIL.

AVERTISSEMENT :risque de blesser les animaux domestiques. Ne pas utiliser directement sur les animaux.

• Circuit fuse is blown.

• Circuit breaker is tripped.

• Replace circuit fuse. (If the product repeatedly causes the circuit fuse to blow, discontinue use immediately and have it serviced at a Black & Decker service center or authorized servicer.)

•Reset circuit breaker. (If the product repeatedly causes the circuit breaker to trip, discontinue use

AVERTISSEMENT : Se conformer aux mesures suivantes afin d’éviter les risques d’incendie, de secousses électriques ou de blessures.

•Ne pas laisser l’appareil branché sans surveillance. Le débrancher lorsqu'on ne s’en sert pas ou qu'on doit le réparer.

•Utiliser à l'intérieur seulement. Ne pas s'en servir sur des surfaces mouillées.

•Ne pas utiliser ni ranger l’appareil à l’extérieur ou sur des surfaces mouillées. Afin de ne pas trébucher, ranger l’aspirateur après chaque utilisation.

•Surveiller avec vigilance lorsque des enfants se trouvent à proximité de tout appareil. Il ne s'agit pas d'un jouet.

•Utiliser seulement aux fins décrites dans le présent guide. Utiliser seulement des accessoires recommandés par le fabricant.

Page 1 Page 3
Page 2
Image 2
Black & Decker 90510266, HV9000P instruction manual Assembly, Operation, Polarization Plugs, Troubleshooting
Page 1 Page 3

90510266, HV9000, HV9000P specifications

The Black & Decker HV9000P is a versatile handheld vacuum cleaner that stands out for its powerful suction capabilities and user-friendly design. This model, often identified by its product number 90510266, is engineered to tackle a variety of cleaning tasks, making it a valuable addition to any household.

One of the main features of the HV9000P is its impressive motor, which generates strong suction power, allowing users to easily clean up dirt, dust, and debris from multiple surfaces, including carpets, upholstery, and hard floors. The vacuum is designed with a bagless system, which means there is no need to worry about replacing bags. Instead, it utilizes a large, easy-to-empty dustbin that can hold a significant amount of dirt before needing to be emptied.

The ergonomics of the HV9000P are another highlight. Its lightweight design makes it easy to maneuver and transport around the home, while the comfortable grip ensures that users can handle the appliance without experiencing fatigue. The compact size of the vacuum enables it to fit into tight spaces, making it ideal for cleaning in corners, under furniture, and in vehicles.

In terms of technology, the Black & Decker HV9000P features a unique cyclonic action that helps to keep the filter clean and maintain suction power over prolonged use. This technology effectively separates dirt from the air, resulting in a more efficient cleaning experience and less hassle for the user. The vacuum also comes equipped with a number of attachments, including a crevice tool and a brush, to enhance its versatility. These tools allow for specialized cleaning of areas that require more precision or different cleaning techniques.

Another essential characteristic of the HV9000P is its energy efficiency. The vacuum is designed to deliver powerful performance while minimizing energy consumption. This focus on efficiency not only helps reduce utility bills but also contributes to a more sustainable cleaning solution.

In conclusion, the Black & Decker HV9000P, with its powerful suction, user-friendly design, and advanced technologies, offers an effective cleaning solution for modern households. Whether it’s for quick clean-ups or thorough cleaning sessions, this handheld vacuum cleaner proves to be a reliable partner in maintaining cleanliness and hygiene.
Top Page Image Contents