CAUTION: Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters and an empty dust bowl. If dust begins to fall
back out of the appliance after switching it off, this indicates that the dust bowl is full and must be emptied.
Cleaning the turbo brush
First remove the turbo brush from the unit. Press the button on the front of the brush and lift the top off. There may be some hair, dust, lint, etc. on the turbine wheel and or brush. Remove as much of this as possible. Once cleaned replace the top and snap back in place
(see figures E1, E2 and E3).
Replacing the filters
The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (cat. no. HVF91).
•Remove the old filters as described above.
•Fit the new filters as described above.
Storage
•Wrap the power supply cord around the appliance.
•Store the appliance and the attachments in a dry location out of the reach of children.
Cleaning/Maintenance
WARNING: Before cleaning and maintenance, switch the appliance off and unplug it.
From time to time wipe the appliance with a damp cloth. Do not use any abrasive or sol-
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
| TROUBLESHOOTING |
|
Problem | Possible Cause | Possible Solution |
• Unit will not start. | • Cord not plugged in. | • Plug tool into a working |
|
| outlet. |
| • Circuit fuse is blown. | • Replace circuit fuse. |
|
| (If the product repeatedly |
|
| causes the circuit fuse to |
|
| blow, discontinue use |
|
| immediately and have it |
|
| serviced at a Black & |
|
| Decker service center or |
|
| authorized servicer.) |
| • Circuit breaker is tripped. | • Reset circuit breaker. |
|
| (If the product repeatedly |
|
| causes the circuit breaker |
|
| to trip, discontinue use |
|
| immediately and have it |
|
| serviced at a Black & |
|
| Decker service center or |
|
| authorized servicer.) |
| • Cord or switch is damaged. | • Have cord or switch |
|
| replaced at Black & |
|
| Decker Service Center or |
|
| Authorized Servicer. |
WARNING:The use of any accessory not recommended for use with this tool could be hazardous.
Service Information
Black & Decker offers a full network of
SPECIFICATIONS |
|
|
|
|
|
B2 | B3 | B2C | BR | ||
Voltage | 220V | 220V | 120V | 220V | 127V |
Frequency | 50Hz | 60Hz | 60Hz | 50Hz | 60Hz |
Power | 800W | 800W | 800W | 800W | 800W |
Solamente para propósito de Argentina:
Importado por: Black & Decker Argentina S.A.
Pacheco Trade Center
Colectora Este de Ruta Panamericana
Km. 32.0 El Talar de Pacheco
Partido de Tigre
Buenos Aires (B1618FBQ)
República de Argentina
No. de Importador: 1146/66
Tel. (011)
Imported by/Importado por:
Black & Decker do Brasil Ltda.
Rod. BR 050, s/n° - Km 167
Dist. Industrial II
Uberaba ˆ MG ˆ Cep:
CNPJ:
Insc. Est.:
S.A.C.:
Solamente para propósitos de CCA
Importado por: Black & Decker LLC
Calle Miguel Brostella Final
Edificio Milano I, Mezanine 5,6 y 7
El Dorado, Panama
Tel.
Solamente para propósitos de Colombia Importado por: Black & Decker de Colombia, S.A. Carrera 85D #
Complejo Logístico San Cayetano
Bogota - Colombia
Tel.
Solamente para propósito de Chile:
Importado por: Black & Decker de Chile, S.A. Av. Pdte. Eduardo Frei M.
Tel.
Solamente para propósito de México:
Importado por: Black & Decker S.A. de C.V. Bosques de Cidros, Acceso Radiatas No.42 3a. Sección de Bosques de las Lomas Delegación Cuajimalpa,
05120, México, D.F.
Tel. (52)
R.F.C.:
Black & Decker del Perú S.A.
Av. Enrique Meiggs 227.
Pque. Industrial - Callao
Teléfono: (511)
RUC 20266596805
Impreso en China
Impresso na China
Printed in China
08/27/07
