Features
•1500W
•Oscillation
•
•Fan
•Safety switch
How to use your Fan Heater
Caution: This product is intended for heating rooms. Do not use this appliance for any other purpose. For indoor, domestic use only.
Heater Operation:
•Place the unit on the floor away from any obstructions, pointing towards the area of the room to be heated.
•Rotate the heating selector (3) to setting l or ll as required, and rotate the thermostat dial (1) to maximum.
•Connect the appliance to a suitable electrical supply.
•The “power” & “heating” lamps (2 & 5) will illuminate and warm air will be blown into the room.
•When the temperature of the room is at the desired level, rotate the thermostat dial (1) slowly in an anticlockwise direction until the appliance just stops working. The “heating” lamp (5) will go out. The temperature will be maintained at the present level by the thermostat inside the unit.
•During this time, the “power” lamp (2) will remain lit, but the “heating” lamp (5) will cycle on and off with the Heater.
•When it is no longer necessary to heat the room, rotate the heating selector (3) to setting “0” to switch the unit off and unplug it from the mains supply.
Note: This appliance must be attended in use.
Fan Operation:
•Place the unit on the floor away from any obstructions, pointing towards the area of the room you want to cool.
•Rotate the heating selector (3) to the Fan setting, and rotate the thermostat dial (1) to maximum.
•Connect the appliance to a suitable electrical supply.
•The “power” & “heating” lamps (2 & 5) will illuminate and cool air will be blown into the room.
•Note that the fan will cycle on and off if the thermostat dial (1) is set at a lower temperature.
•During operation, the “power on” (2) lamp will remain lit, but the “heating” lamp (5) will only be lit when the fan is running.
•When it is no longer necessary to cool the room, rotate the heating selector (3) to setting “0” to switch the unit off and unplug it from the mains supply.
Warning: In order to avoid overheating, do not cover this appliance.
