Black+Decker rechargeable batteries. Any other uses may result in risk of fire,

•

electric shock or electrocution.

 

 

 

 

 

Do not expose charger to rain or snow.

 

 

 

 

•

Pull by plug rather than cord when disconnecting charger. This will reduce risk of

•

damage to electric plug and cord.

 

 

 

 

 

Make sure that cord is located so that it will not be stepped on, tripped over, or

•

otherwise subjected to damage or stress.

 

 

 

 

Do not use an extension cord unless it is absolutely necessary. Use of improper

•

extension cord could result in risk of fire, electric shock, or electrocution.

 

 

An extension cord must have adequate wire size (AWG or American Wire Gauge) for

 

safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is

 

16 gauge has more capacity than 18 gauge. When using more than one extension to make up

 

the total length, be sure each individual extension contains at least the minimum wire size.

 

 

Recommended Minimum Wire Size for Extension Cords

 

Total Length of Cord

75 ft.

100 ft.

125 ft.

150 ft.

175 ft.

 

25 ft.

50 ft.

 

7.6 m

15.2 m

22.9 m

30.5 m

38.1 m

45.7 m

53.3 m

 

Wire Size AWG

16

16

14

14

12

 

 

18

18

 

•Do not place any object on top of charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.

•Do not mount charger on wall or permanently affix charger to any surface. The charger is intended to use on a flat, stable surface (i.e., table top, bench top).

•Do not operate charger with damaged cord or plug — have them replaced immediately.

•Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center.

•Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

•Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric shock. Removing the battery pack will not reduce this risk.

•NEVER attempt to connect 2 chargers together.

•The charger is designed to operate on standard household electrical power (120 Volts). Do not attempt to use it on any other voltage.

FUNCTIONAL DESCRIPTION

 

 

 

 

1.

Variable speed switch

 

 

 

 

2.

Forward/reverse button

 

 

 

 

3.

Torque Adjustment Collar

 

 

 

 

4.

Keyless Chuck

4

 

 

 

5.

Battery

3

 

2

6.

Battery release button

 

1

7.

Charger

 

 

 

8.

Screwdriver bit holder

 

 

 

 

 

7

 

5

 

8

 

 

 

 

 

 

 

 

 

 

6

 

 

5

 

 

 

Page 4 Page 6
Page 5
Image 5
Black & Decker LDX112C-2R, LDX112CR instruction manual Functional Description
Page 4 Page 6

LDX112CR, LDX112C, LDX112C-2R specifications

Black & Decker has long been synonymous with quality and reliability in the power tool market, and the LDX112C, LDX112C-2R, and LDX112CR models are no exception. These cordless drills are designed for both DIY enthusiasts and professionals, providing exceptional performance and versatility for a variety of tasks.

One of the standout features of these models is their 20V Lithium-Ion battery, which provides ample power for extended use while maintaining a lightweight design. The battery ensures longer run times and faster charging, allowing users to complete projects without frequent interruptions. The LDX112C-2R and LDX112CR come with two batteries, making it easy to switch out for continuous operation.

The LDX112C and its variants boast a compact and ergonomic design, making them comfortable to hold and easy to maneuver in tight spaces. This design factor greatly reduces user fatigue, especially during prolonged use. Weighing in at just a few pounds, these drills are light enough for overhead work, making them excellent for various applications, whether it's drilling holes in drywall or assembling furniture.

Equipped with an adjustable clutch, the LDX112C series allows users to control the torque settings for specific tasks, preventing overdriving screws or damaging materials. The 11-position clutch provides the versatility that novice and seasoned users alike can appreciate. Additionally, these drills feature a two-speed transmission that allows for variable speeds, providing improved control for different drilling and fastening applications.

Another notable aspect is the integrated LED work light, which illuminates dark work areas, enabling users to work more effectively in low-light conditions. The 3/8-inch keyless chuck ensures that bit changes are quick and hassle-free, allowing for smooth transitions between different attachments without the need for additional tools.

In terms of technology, the LDX112C series leverages advanced lithium-ion technology, which not only enhances battery life but also supports consistent power throughout the charge cycle. This means users can expect reliable performance from start to finish.

In conclusion, the Black & Decker LDX112C, LDX112C-2R, and LDX112CR drills represent an excellent investment for anyone seeking a dependable cordless drilling solution. With their robust features, user-friendly design, and impressive battery life, these tools can tackle a variety of projects with ease, establishing them as essential additions to any toolkit. Whether you're drilling, fastening, or working on home improvement projects, these drills deliver the power and versatility needed to get the job done efficiently.
Top Page Image Contents