SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazard­ous­ situation which, if not avoided, may result in minor or moder­ate­ injury.

NOTICE: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

General Safety Rules

WARNING: Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1) Work Area Safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents. b) Do not operate power tools in explosive atmospheres, such as in the

presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, nonskid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/ or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables

2

Page 1 Page 3
Page 2
Image 2
Black & Decker LDX112C-2R, LDX112CR instruction manual Safety Guidelines Definitions, Work Area Safety
Page 1 Page 3

LDX112CR, LDX112C, LDX112C-2R specifications

Black & Decker has long been synonymous with quality and reliability in the power tool market, and the LDX112C, LDX112C-2R, and LDX112CR models are no exception. These cordless drills are designed for both DIY enthusiasts and professionals, providing exceptional performance and versatility for a variety of tasks.

One of the standout features of these models is their 20V Lithium-Ion battery, which provides ample power for extended use while maintaining a lightweight design. The battery ensures longer run times and faster charging, allowing users to complete projects without frequent interruptions. The LDX112C-2R and LDX112CR come with two batteries, making it easy to switch out for continuous operation.

The LDX112C and its variants boast a compact and ergonomic design, making them comfortable to hold and easy to maneuver in tight spaces. This design factor greatly reduces user fatigue, especially during prolonged use. Weighing in at just a few pounds, these drills are light enough for overhead work, making them excellent for various applications, whether it's drilling holes in drywall or assembling furniture.

Equipped with an adjustable clutch, the LDX112C series allows users to control the torque settings for specific tasks, preventing overdriving screws or damaging materials. The 11-position clutch provides the versatility that novice and seasoned users alike can appreciate. Additionally, these drills feature a two-speed transmission that allows for variable speeds, providing improved control for different drilling and fastening applications.

Another notable aspect is the integrated LED work light, which illuminates dark work areas, enabling users to work more effectively in low-light conditions. The 3/8-inch keyless chuck ensures that bit changes are quick and hassle-free, allowing for smooth transitions between different attachments without the need for additional tools.

In terms of technology, the LDX112C series leverages advanced lithium-ion technology, which not only enhances battery life but also supports consistent power throughout the charge cycle. This means users can expect reliable performance from start to finish.

In conclusion, the Black & Decker LDX112C, LDX112C-2R, and LDX112CR drills represent an excellent investment for anyone seeking a dependable cordless drilling solution. With their robust features, user-friendly design, and impressive battery life, these tools can tackle a variety of projects with ease, establishing them as essential additions to any toolkit. Whether you're drilling, fastening, or working on home improvement projects, these drills deliver the power and versatility needed to get the job done efficiently.
Top Page Image Contents