Black & Decker LHT2220 instruction manual Safety Guidelines - Definitions, Table Of Contents

TABLE OF CONTENTS
Safety Guidelines - Definitions	2
General Safety Rules	2
Components	4
Important Safety Instructions for Battery Chargers	5
Important Safety Instructions for Battery Packs	6
Charging Procedure	7
Installing/Removing Battery Pack	8
Operation	8
Maintenance	9
Accessories	11
Service Information	11
Two-Year Home Use Warranty	11
Troubleshooting	12
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The
information it contains relates to protecting YOUR SAFETY and
PREVENTING PROBLEMS. The symbols below are used to help
you recognize this information.
DANGER: Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.

	GENERAL POWER TOOL SAFETY WARNINGS
	WARNING: Read all safety warnings and instructions.
	Failure to follow the warnings and instructions may result in electric
	shock, fire and/or serious injury.
	Save all warnings and instructions for future reference.
	The term “power tool” in the warnings refers to your mains-operated
	(corded) power tool or battery-operated(cordless)power tool.
	1) Work area safety
	a) Keep work area clean and well lit. Cluttered or dark areas
	invite accidents.
	b) Do not operate power tools in explosive atmospheres,such
	as in the presence of flammable liquids, gases or dust.
	Power tools create sparks which may ignite the dust or fumes.
	c) Keep children and bystanders away while operating a
	power tool. Distractions can cause you to lose control.
	2) Electrical safety
	a) Power tool plugs must match the outlet. Never modify the
	plug in any way. Do not use any adapter plugs with earthed
	(grounded) power tools. Unmodified plugs and matching
	outlets will reduce risk of electric shock.
	b) Avoid body contact with earthed or grounded surfaces such
	as pipes, radiators, ranges and refrigerators. There is an
	increasedriskof electric shockif yourbodyis earthedor grounded.
	c) Do not expose power tools to rain or wet conditions. Water
	entering a power tool will increase the risk of electric shock.
	d) Do not abuse the cord. Never use the cord for carrying,
	pulling or unplugging the power tool. Keep cord away from
	heat, oil, sharp edges or moving parts. Damaged or
	entangled cords increase the risk of electric shock.
	e) When operating a power tool outdoors, use an extension
	cord suitable for outdoor use. Use of a cord suitable for
	outdoor use reduces the risk of electric shock.
	f) If operating a power tool in a damp location is unavoidable,
	use a ground fault circuit interrupter (GFCI) protected
2	supply. Use of a GFCI reduces the risk of electric shock.