Black & Decker LLP120B manual Symbols, Electrical safety

object. Kickback can lead to dangerous loss of control of the chain saw.

WARNING: The following features are included on your Alligator LopperTM to help reduce the hazard of kickback;

however such features will not totally eliminate this dangerous reaction. As a chain saw user do not rely only on safety devices. You must follow all safety precautions, instructions, and maintenance in this manual to help avoid kickback and other forces which can result in serious injury.

Top Jaw - This has been designed specifically to cover the tip of the chain bar where the danger zone for kickback occurs. In the event of any kickback the guard also helps reduce the risk of the chain coming into contact with the operator.

Reduced Kickback Guide Bar - This has been designed with a small radius tip which reduces the size of the kickback zone on the bar tip. Reduced Kickback Chain - Designed with a contoured depth gauge and guard link which deflect kickback force and allows wood to gradually ride into the cutter.

Electrical safety

This tool and charger is double insulated; therefore no grounding wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains

chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber. (CCA)

Your risk from these exposures varies, depending on how often you

do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety

5

equipment, such as those dust masks that are specially designed to filter out microscopic particles.

•Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin

may promote absorption of harmful chemicals.

WARNING: Use of this tool can generate and/or disburse

dust, which may cause serious and permanent respiratory or

other injury. Always use NIOSH/OSHA approved respiratory

protection appropriate for the dust exposure. Direct particles away from face and body.

CAUTION: Wear appropriate personal hearing protection during use. Under some conditions and duration of use, noise

from this product may contribute to hearing loss.
Symbols
The label on your tool may include the following symbols.
The symbols and their definitions are as follows:						amperes
V			volts	A
Hz			hertz	W		watts
min			minutes		or AC	alternating current
		or DC	direct current	no		no load speed
			Class I Construction			earthing terminal
	.....................				....................
			(grounded)		..................	safety alert symbol
	.....................		Class II Construction	.../min or rpm...		revolutions or
			(double insulated)			reciprocation per minute

................ Read instruction manual before use

..................... Use proper respiratory protection

..................... Use proper eye protection

..................... Use proper hearing protection