being cut has been cut. If this does not occur, discontinue use of the tool and remove the battery pack. Check if any debris is blocking movement. To help in this process it may be necessary to remove chain access cover(13). If on assembly the problem is still present take the unit to a service center.

Oiling (fig. I)

I

A high quality bar and chain oil or

SAE30 weight motor oil should be

 

used for chain and bar lubrication.

 

The use of a vegetable based bar

 

and chain oil is recommended when

 

pruning trees. Never use waste oil

 

or very thick oil. These may damage

 

your chain saw.

 

- Before first use and every ten

5

minutes of use you must oil the

16

product with the recommended

 

chain oil. Open the oiling cover

 

(4) and insert the bottle into the oil

 

filling hole (16) apply pressure to the bottle once to dispense oil.

- This should be adequate for about 10 minutes of cutting

depending upon cutting speed and type of wood.

- The hole feeds the oil through to the chain onto the chain bar

and an excessive amount of oil applied to the unit could mean the

oil drips from the unit around the jaw area. This is normal and is

nothing to be concerned about.

 

Switching on and off (fig. J) For your safety, this tool is equipped J with a double switching system.

This system prevents starting the tool inadvertently.

A chain saw is intended for two- handed use. Serious injury to the operator, helpers, and/or bystanders can result from one-handed operation.

Switching on (fig. K)

K

To open the handles, slide the latch (5)

backwards and pull the handles apart.

 

Ensure a firm grip on the handles and

5

then squeeze both switch actuators to

switch the unit on.

 

Note: Both switches must be

 

activated for the product to be used.

 

Do not force the tool - allow it to do

 

the work. It will do a better and safer job at the speed for which it is

designed. Excessive force will stretch the chain.

If the saw chain or bar becomes jammed:

-

Switch the tool off.

 

-

Remove the battery from the tool.

 

-

Open the cut with wedges to relieve the strain on the guide bar.

Do not try to wrench the saw free. Start a fresh cut. After use, close

the handles and slide the latch (5) forward to the lock position. The

handles should be locked during transportation and storage.

Trimming branches

 

-

Make sure the tool is running at full speed before making a cut.

-

Hold the tool firmly in place to avoid possible bouncing or

sideways movement of the tool.

 

-

Guide the tool using light pressure.

 

-

Always cut down from the top. This way you will avoid pinching

the saw chain.

 

- Remove branches as shown in Fig L.

Starting from branch tip reduce

L

the branch in logical steps cutting

off small sections. “When cutting a

 

limb that is under tension be aware

 

of spring back.

 

-

When the tension in the wood

 

fibres are released the spring

 

loaded limb may strike the operator

 

and /or throw the tool out of control”

 

-

Remove the tool from the cut

 

while it is running at full speed.

 

12

Page 12
Image 12
Black & Decker LLP120B manual Oiling fig, Switching on fig. K, Trimming branches, Remove branches as shown in Fig L

LLP120B specifications

The Black & Decker LLP120B is a versatile and powerful cordless lithium-ion electric wine opener that has gained popularity among wine enthusiasts for its sleek design and remarkable performance. This innovative tool streamlines the wine-opening process, making it an essential accessory for any home bar or kitchen.

One of the standout features of the LLP120B is its cordless convenience. This electric wine opener allows users to uncork wine bottles effortlessly without the hassle of tangled cords. Powered by a lithium-ion battery, it offers the freedom to open bottles anywhere, whether at home, during a picnic, or at a gathering with friends.

In terms of design, the Black & Decker LLP120B boasts an ergonomic grip that enhances ease of use. Its lightweight and comfortable build allows for a secure hold, making it accessible for users of all ages. With its modern aesthetic and sleek lines, it also adds a touch of elegance to any tabletop setting.

The efficiency of the LLP120B is another key characteristic. It can open up to 30 bottles on a single charge, making it ideal for entertaining guests without the worry of running out of battery power. The quick and reliable operation ensures that users can enjoy their wine without unnecessary delays.

The device is equipped with a durable stainless steel and plastic construction that guarantees longevity. Its spiral and corkscrew mechanism is designed to fit all standard cork sizes, providing versatility for various wine bottles. Additionally, the LLP120B features a built-in foil cutter, allowing users to remove foil caps with ease before uncorking their bottles.

Charging the Black & Decker LLP120B is a breeze, thanks to its convenient charging base that allows the opener to be stored tidily when not in use. This aspect not only maintains the device but ensures that it is always ready for action when needed.

In conclusion, the Black & Decker LLP120B is an exceptional electric wine opener that combines convenience, efficiency, and style. Its cordless design, ergonomic grip, sturdy construction, and ability to handle multiple bottles on a single charge position it as a must-have for wine lovers. Whether hosting a casual gathering or enjoying a quiet evening, this electric wine opener makes the experience smoother and more enjoyable.