times. Never carry saw by the cord or pull it to disconnect from receptacle. Keep cord from oil and sharp edges. Inspect extension cords periodically and replace if damaged. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease.
5. Service
a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
b.If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.
Additional safety instructions for the AlligatorTM Lopper
WARNING: Never use the tool above shoulder height. Always position yourself out of the path of falling branches and debris. WARNING: Do not use this tool to fell trees.
-
-Be aware of the direction that a branch may fall. Consider all conditions that may affect the direction of fall, including:
-The intended direction of fall.
-The natural lean of the branch.
-Any unusual heavy limb structure or decay.
-Surrounding trees and obstacles including overhead lines.
-The wind speed and direction.
-The safe distance between a branch and debris to be felled and bystanders, buildings and other objects is at least 2 1/2 times the length of the branch. Any bystander, building or object within this
distance is at risk from being struck by the falling branch.
-When cutting a limb that is under tension be aware of spring back. When the tension in the wood fibres are released the spring loaded limb may strike the operator and/or throw the tool out of control.
-Always wear suitable safety equipment such as
-Ensure someone is nearby (at a safe distance) in case of an accident.
-Do not attempt to operate the tool when in a tree, on a ladder or standing on any other unstable support.
-Keep proper footing and balance at all times.
-Hold the tool firmly with both hands when the motor is running.
-Keep handles dry, clean and free from oil and grease. Greasy oily handles are slippery causing loss of control.
-Do not let the moving chain contact any object at the tip of the guide bar.
-Keep your saw chain properly tensioned. Check tension at regular intervals with the motor stopped and cord disconnected.
-Begin and continue cutting only with the chain moving at full speed.
-Watch for shifting branches or other forces that could close a cut and pinch or fall into the chain.
-Use extreme caution when
-Use of this tool for operation different to those intended could result in hazardous situations. Cut wood only. Don't use this tool for purposes not intended - for example - Don't use tool for cutting plastic, masonry or
-If any debris gets caught with the guard or tool discontinue use, disconnect power cord and clear debris.
4