VacUUM operation

NOTE: Ensure the sweeper is switched off and the battery is removed from tool before attaching or removing the vacuum tubes. The vacuum tube and collection bag must be assembled to the housing before use. Install battery after assembly just prior to use.

•Attach the collection bag to the power head as shown in figure E.

•Remove the fan cover from the side of the sweeper housing by pressing the spring loaded release button (located on the lower right side of the sweeper housing) and pulling the cover off (figure G).

•Attach the vacuum tube assembly to the fan inlet on the sweeper housing (figure H) by lining up the tabs on the tube with the slots on the sweeper housing and push inwards until the locking/release button is fully engaged. (figure H1)

•Position the tube slightly above the debris/leaves. Turn the unit on, then using a side to side sweeping motion the debris/leaves will be sucked up the tube, mulched and deposited into the collection bag

(figure L) .

As the bag fills the power of the suction will decrease. To empty

collection bag, switch off your product and remove the battery from

the tool. Remove the collection bag from the power head, unzip the

collection bag to empty. Re-assemble

L

before continuing to operate.

When used properly on the correct applications, this unit should not jam. This tool is not intended to vacuum wet leaves or debris and is designed primarily for clean up of hard surfaces like decks, patios or garages. The tool should not be used to vacuum litter or non-organic debris.

What to do if the unit jams: (FIGURE M)

CAUTION: TURN OFF UNIT AND REMOVE BATTERY FROM TOOL.

If the unit motor stops, the fan has become jammed. If this happens,turn the unit off then remove the battery. Remove the bag and vacuum tube. Remove the jamming material using a small wooden stick. Do not use a metal implement or anything, which may damage the fan or scratch the plastic. Ensure the fan will turn by hand before reassembling the unit.

If the unit stops picking up debris or the performance substantially

reduces it may have become clogged. Switch the unit off then

remove the battery. Remove the vacuum tube and look down the

tube to ensure no debris is blocking it. If necessary remove debris

with a small wooden stick. Do not use a metal implement or

anything, which may scratch or

 

damage the tube. Remove the bag.

M

If the bag is full, empty the bag. If

necessary remove any debris

 

from around the fan or unit outlet

 

using a small wooden stick.

 

Do not use a metal implement or

 

anything which may damage the

 

fan or scratch the plastic. Ensure the

 

fan will turn by hand before

 

reassembling the unit

 

Actions that may lead to the unit jamming are:

• Vacuuming wet leaves or wet debris.

• Vacuuming litter or non-organic debris.

• Vacuuming debris with an already filled bag.

• Vacuuming large twigs or sticks.

• Submerging the tip of the vacuum tube into a pile of leaves or debris.

10

Page 9 Page 11
Page 10
Image 10
Black & Decker LSWV36R manual VacUUM operation, What to do if the unit jams Figure M
Page 9 Page 11

LSWV36, LSWV36R specifications

The Black & Decker LSWV36 and LSWV36R are versatile cordless leaf blowers that embody efficiency and convenience for outdoor maintenance. These models provide exceptional power in a lightweight design, making them ideal for homeowners looking to keep their yards tidy without the hassle of cords or gas.

One of the standout features of the LSWV36 and LSWV36R is the 36-volt lithium-ion battery. This technology ensures longer run times and faster charging, allowing users to complete their tasks without frequent interruptions. The battery delivers consistent power, ensuring that the blower operates at peak performance until the charge is exhausted. Users can expect up to 30 minutes of runtime on a single charge, which is generally sufficient for most residential lawns.

Both models boast a powerful wind speed of up to 120 mph, allowing for efficient leaf removal and debris clearance from sidewalks, driveways, and patios. The lightweight and ergonomic design of the blowers makes them easy to maneuver, reducing arm fatigue during extended use. Weighing approximately 7.5 pounds, these leaf blowers are manageable for users of all ages.

The LSWV36 and LSWV36R come equipped with two speed settings, providing the flexibility to tackle different tasks. The lower speed setting is perfect for clearing grass clippings, while the higher speed is ideal for moving stubborn leaves and heavier debris. This feature ensures that users have control over the tool's performance, adapting to the specific needs of their outdoor spaces.

Moreover, the LSWV36R model features a vacuum and mulching system, which adds to its versatility. Users can easily switch from blowing leaves to vacuuming them up, transforming yard waste into mulch for composting or garden use. This dual functionality not only saves time but also assists in creating an eco-friendly gardening solution.

In summary, the Black & Decker LSWV36 and LSWV36R deliver powerful performance, runtime efficiency, and dual functionality, making them indispensable tools for maintaining a clean and orderly yard. They combine innovative technology with user-friendly features, providing an excellent solution for anyone seeking a reliable cordless leaf blower. Whether blowing leaves or mulching yard waste, these models are sure to exceed expectations.
Top Page Image Contents