operation
always wear safety glasses. wear A filter mask if the operation is dusty. use of rubber gloves and substantial footwear is recommended when working outdoors. For household use only.
WARNING: Cut Hazard. When turning the tool off for tube installation or any other reason, wait 10 seconds for the fan to stop rotating before disassembly.
•Do not use in vacuum mode without the vacuum tubes and collection bag in place.
•Always switch off and remove the battery when:
•Changing from blower to vacuum.
•The power supply cord has become damaged or entangled.
•You leave blower/vac unattended.
•Clearing a blockage.
•Checking, adjusting, cleaning or working on blower/vac.
Use blower/vac only in daylight or good artificial light.
Switching on and off (Figure I)
WARNING: Use both hands to grip the product firmly when switching on.
POWER COMMAND (Figure J) | J | J1 |
Max Power / Max Runtime | ||
The max power / max runtime feature |
|
|
(J1) is located on the tool handle. |
|
|
It allows you to optimize the tools |
|
|
performance and boost the power as |
|
|
needed. |
|
|
• To choose max power, rotate dial |
|
|
to setting 6. (most vacuuming tasks |
|
|
require max power.) |
|
|
•To maximize runtime rotate dial to setting 1.
•For a combination of both, rotate dial to setting from 2 to 5.
Sweeper operation
CAUTION: Always wear safety
glasses. Wear a filter mask if the K operation is dusty. Use of gloves, long
pants and substantial footwear is recommended. Keep long hair and loose clothing away from openings and moving
parts. THIS SWEEPER IS FOR
HOUSEHOLD USE ONLY.
NOTE: Ensure the sweeper is switched off and the battery is removed before attaching or removing the sweeper tubes.
To switch the sweeper on, slide the on/off switch forward.
To switch the sweeper off, slide the on/off switch back.
CAUTION: Do not point unit discharge at self or bystanders.
I |
9 |
The sweeper tube must be assembled to the housing before use. Install battery after assembly just prior to use.
•Hold the sweeper with one hand as
shown in figure K and sweep from side to side with the nozzle several inches above the hard surface. Slowly advance keeping the accumulated pile of debris in front of you.
