Black & Decker NHT2218 Installing / Removing Battery Pack, operation, Trimming Instructions

Models: NHT2218

1 44
Download 44 pages 31.73 Kb
Page 8
Image 8
Installing / Removing Battery Pack

pack enough charge to stay “topped off”. If however, the tool is not expected to be needed for more than 30 days, unplug the charger and store battery pack in a cool, dry location. NOTE: A battery pack will lose its charge when kept off of the charger. If the battery pack has not been kept on maintenance charge, it may need to be recharged before use. A battery pack may also lose its charge if left in a charger that is not plugged into an appropriate AC source.

operation WARNING: Shock hazard. Do not allow any liquid to get inside charger. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, return to a service center for recycling.

Installing / Removing Battery Pack

TRIMMING INSTRUCTIONS WARNING: Make certain the lock-off button is engaged to prevent switch actuation before removing or installing battery.

To install battery pack: Insert battery pack into tool until an audible click is heard (figure 2). Make sure battery pack is fully seated and fully latched into position.

operation

SWITCH

To turn the unit “ON”, slide the lock off button, 3 shown in figure 3, backward and, squeeze

the trigger switch. Once the unit is running, you may release the lock off button. In order to keep the unit running you must continue to squeeze the trigger. To turn the unit “OFF”, release the trigger.

Manual backgroundWARNING: Never attempt to lock a switch in the ON position.

TRIMMING INSTRUCTIONS

4

1. WORKING POSITION – Maintain

 

proper footing and balance and do not

 

overreach. Wear safety goggles, non-skid

 

footwear when trimming. Hold the unit

 

firmly in both hands and turn the unit ON.

 

Always hold the trimmer, as shown in the

 

illustrations in this manual, with one hand

 

on the switch handle and one hand on the

 

To remove battery

pack: Depress the battery release button in the back of the battery pack and pull battery pack out of tool (figure 2).

2

bail handle. (figure 4) Never hold the unit

by the blade guard.

 

2. TRIMMING NEW GROWTH – (Figure

5

5) A wide, sweeping motion, feeding

the blade teeth through the twigs is

 

most effective. A slight downward tilt

 

of the blade, in the direction of motion

0-15

gives the best cutting.

 

Manual backgroundCAUTION: Do not cut stems greater Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background than 3/4 inch (19mm). Use the trimmer Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

8

Page 8
Image 8
Black & Decker NHT2218 instruction manual Installing / Removing Battery Pack, operation, Trimming Instructions