625116-00 NPP2018 Pole 11/12/04 9:11 AM Page 12

Pruning With the Pole Saw

Warning: When pruning trees:

•Guard Against Kickback which can result in 22 severe injury or death. See “KICKBACK”, page 3 to avoid the risk of kickback.

•Do not overreach. Make sure your footing is firm. Keep feet apart. Divide your weight evenly on both feet.

•Use both hands to grip Pole Saw as shown in figure 22. Use a firm grip. Thumbs and fingers must wrap around Pole Saw handle and pole. Keep fingers away from

sawdust exhaust chute shown in

22a

figure 22a.

 

• Never operate while in a tree, in

 

any awkward position or on a

 

ladder or other unstable surface.

 

You may lose control of Pole Saw

 

causing severe injury.

 

Follow directions below to trim a tee.

1.Make sure Pole Saw is running at full speed before making a cut. When starting a cut, place moving chain against limb. Hold Pole Saw firmly in place to avoid

possible bouncing or skating

23

(sideways movement) of Pole

 

Saw.

 

2. Guide Pole Saw using light pressure. Make first cut six inches from tree trunk on underside of limb. Use top of guide bar to make this cut. Cut 1/3 through diameter of limb. Then make the finish cut from the top as shown in figure 23.

If you try to cut off thick branches

24

 

 

 

 

from the bottom, the branch may

 

 

 

 

 

 

 

 

 

close in and pinch the saw chain

 

 

 

 

 

 

 

 

 

 

in the cut. If you try to cut off thick

 

 

 

 

 

branches from the top, without a

 

 

 

 

 

shallow undercut, the branch may

 

 

 

 

 

splinter figure 24.

 

 

 

 

 

 

 

 

 

 

Do not force Pole Saw. The motor will overload and can burn out. It will do the job better and safer at the rate for which it was intended.

3.Remove Pole Saw from cut while

it is running at full speed. Stop Pole Saw by releasing trigger. Make sure chain has stopped before setting Pole Saw down.

Saw chain sharpness

The cutters will dull immediately if they touch the ground or a nail while cutting.

Saw chain tension

This should be done regularly. Refer to page 8 “Adjusting Chain Tension”.

Pole Saw Maintenance Section

Regular maintenance ensures a long effective life for the tool. After every 10 minutes of use be sure to remove the battery (be aware the chain and bar can be hot!) check the bar and chain for correct tension and lubricate per pole saw instruction manual. Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

12

Page 11 Page 13
Page 12
Image 12
Black & Decker NPP2018R Pruning With the Pole Saw, Saw chain sharpness, Saw chain tension, Splinter figure
Page 11 Page 13

NPP2018R, NPP2018 specifications

The Black & Decker NPP2018 is a powerful and innovative outdoor tool designed for homeowners who want to maintain their yards with ease and efficiency. This electric pole saw features an 18-volt lithium-ion battery that delivers impressive cutting performance while providing the convenience of being cordless. With a lightweight design and user-friendly features, the NPP2018 is ideal for trimming branches, pruning trees, and tackling tough overgrown areas.

One of the standout features of the Black & Decker NPP2018 is its extendable reach. The telescoping pole allows for an adjustable length, extending up to 10 feet, enabling users to access hard-to-reach branches without the need for a ladder. This not only enhances safety but also makes it easier to complete tasks without additional assistance.

The saw is equipped with a 10-inch Oregon bar and chain, which offers efficient cutting and reduced kickback, allowing for smooth operation. The automatic oiling system ensures that the bar and chain are constantly lubricated, significantly extending the tool’s life and maintaining optimal cutting performance. This technology reduces the time and effort required for maintenance, allowing users to focus more on the job at hand.

Additionally, the NPP2018 features a lightweight construction, weighing approximately 6.5 pounds, which enhances portability and maneuverability. The ergonomic handle design provides a comfortable grip and minimizes user fatigue, making it easier to operate for extended periods.

Black & Decker also emphasizes safety with the NPP2018, incorporating a protective sheath for the blade and an easy-to-use safety switch to prevent accidental starts. These features promote secure operation, especially for inexperienced users or those unfamiliar with power tools.

In summary, the Black & Decker NPP2018 is a versatile and effective tool for any homeowner looking to manage their outdoor spaces. With its powerful lithium-ion battery, extendable reach, automatic oiling system, and ergonomic design, this pole saw represents an innovative solution for tackling tree pruning and branch trimming tasks efficiently and safely. Whether you are a gardening novice or a seasoned pro, the NPP2018 delivers the durability and performance needed for effective yard maintenance.
Top Page Image Contents