Black & Decker PHV1210 instruction manual Replacing the filters

• The dust container (11) is attached to the body of the appliance with a bayonet fixing. To remove the dust container, press the dust container release button

(2) and rotate the dust container (11) counterclockwise and carefully slide the dust container clear of the appliance.

• Rotate the filter hook (12) to the vertical position (fig. I).

• Use the filter hook (12) to rotate the filter (13) within the pre-filter (14) to agitate it and remove dirt.

• Remove the main filter (13).

• Brush any loose dust off the filter (13).

• The pre-filter (14) is attached with a bayonet fixing. To remove the pre-filter, rotate the pre-filter (14) counterclockwise and carefully slide it clear of the dust container.

• The dust container can be cleaned. Wipe with a damp cloth or rinse with warm soapy water and allow to dry.

• The filters are re-usable and should be cleaned regularly. Rinse with warm soapy water and allow to dry.

• Install the pre- filter (14) into the dust container (11) rotating it clockwise until it locks into place.

• Install the main filter (13) into the pre-filter (14).

• Install the dust container (11) to the appliance, rotate it clockwise until it locks into place.

G

H

WARNING:Projectile/Respiratory Hazard: Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters.

Replacing the filters

The filters should be replaced every

6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (cat. no. PVF110):

•Remove the old filters as described above.

•Fit the new filters as described above.

I

6