Black & Decker PS400JRB Safety Guidelines / Definitions, Minimum Gage for Cord Sets, Volts

Models: PS400JRB

1 18
Download 18 pages 3.71 Kb
Page 3
Image 3
Minimum Gage for Cord Sets

PS400JRB_Manual EN_090506 SE.qxp 9/6/06 3:38 PM Page 2

EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

 

 

Minimum Gage for Cord Sets

 

Volts

 

 

Total Length of Cord in Feet

120V

 

0-25

26-50

51-100

101-150

 

 

 

(0-7,6m)

(7,6-15,2m)

(15,2-30,4m)

(30,4-45,7m)

240V

 

0-50

51-100

101-200

201-300

 

 

 

(0-15,2m)

(15,2-30,4m)

(30,4-60,9m)

(60,9-91,4m)

Ampere Rating

 

 

 

 

More

Not more

 

American Wire Gage

 

Than

Than

 

 

 

 

0

-

6

18

16

16

14

6

-

10

18

16

14

12

10 -

12

16

16

14

12

12 -

16

14

12

Not Recommended

 

 

 

 

 

 

 

SAFETY GUIDELINES / DEFINITIONS

Volts DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Total Length of Cord in Feet WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

SAFETY GUIDELINES / DEFINITIONS CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Black & Decker strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all warnings and operating instructions before using any tool or equipment.

SAVE THESE INSTRUCTIONS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE POWER STATION MODEL PS400JRB.

SAVE THESE INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY:

Follow these instructions and those published by the battery manufacturer and manufacturer of any equipment you intend to use with this unit. Review cautionary markings on these products and on engine.

2

Page 3
Image 3
Black & Decker PS400JRB Safety Guidelines / Definitions, Minimum Gage for Cord Sets, Volts, Total Length of Cord in Feet