Black & Decker PS400JRB instruction manual Introduction, Features, Save These Instructions

Models: PS400JRB

1 18
Download 18 pages 3.71 Kb
Page 7
Image 7
INTRODUCTION

PS400JRB_Manual EN_090506 SE.qxp 9/6/06 3:38 PM Page 6

FEATURES WARNING: To ensure to continuously monitor alerts from NOAA while the unit is in alert mode, the unit should be checked periodically to confirm its functionality and for loss of reception; also check for loss of reception after moving the unit to a different location.

Test Warnings from NOAA; all National Weather Services periodically transmit test signals. Some stations broadcast a test signal every week on Wednesday between 11 AM and 1 PM, while others test more often, the NWS may also broadcast System demonstrations. You can find out when your local NWS broadcasts test signals by calling the NOAA National Weather Service Forecast Office (listed under “Weather” in the Federal Government section of the telephone book.) During the weekly test signal, the local NWS will give a list of counties covered by their transmitter.

Check unit periodically for wear and tear. Take to a qualified technician for replacement of worn or defective parts immediately.

Read This Instruction Manual Before Using This Unit.

SAVE THESE INSTRUCTIONS

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, These limits are designed to provide reasonable protection against harmful interference to radio communications. However, there is not guarantee that interference to radio or television reception, with can be determined by turning the equipment off and on, user is encouraged to try to connect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between equipment and receiver.

Connect equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

INTRODUCTION

Thank you for purchasing the Black & Decker® PS400JRB Electromate® 400 Plus. Please read this guide carefully before use to ensure optimum performance and avoid damage to the unit.

FEATURES

Powers 110/120 volt AC appliances

Powers 12 volt DC appliances

Jump-starts vehicle engines

Built-in 400 watt inverter

Includes non-spillable, maintenance-free, heavy-duty, sealed battery

Convenient to use, transport and store

Alternator check

Reverse polarity connection warning

Detachable jumper cables

Requires no maintenance (other than recharging) for optimum operation

Rechargeable with built-in AC charger

Unique compact design provides completely portable 12 volt DC power

Molded high-impact case is tough and durable

Built-in area light for night time roadside repairs and use in remote locations without utility power

Battery charge level indicators

AM, FM and Weather Band radio with automatic NOAA Weather/Emergency Alert System

6

Page 7
Image 7
Black & Decker PS400JRB instruction manual Introduction, Features, Save These Instructions