Black & Decker SB3000, SB3020, SB3040 English, Features, Blending, Unpacking, Assembly, Mixing

English

	Use
Features	Blending

1Speed control switch

2Motor housing

3Plastic stem (SB3000 & SB3020)

4Stainless steel stem (SB3040)

5Whisk attachment (SB3040)

6All purpose cutting blade

7Jar

8Jar lid

9Chopper bowl (SB3020 & SB3040)

10Chopper blade (SB3020 & SB3040)

11Chopper lid (SB3020 & SB3040)

12Chopper bowl base

13Wall Bracket

Unpacking

•Remove all packaging from the appliance.

•Clean the appliance before first use.

Assembly

Warning! Before assembly, make sure that the appliance is switched off and unplugged.

Fitting and removing an attachment

•Use the blending attachment (3 or 4) for blending liquids or mashing solids.

•Use the whisk attachment (5) for mixing, beating, whipping and creaming liquids (SB3040 only).

Blending and whisk attachment

•Place the ingredients into a measuring jug or a suitable container.

•Using a stabbing motion, push the blade

(6) into the ingredients until the correct consistency is reached.

•When blending liquids or fluid ingredients, use short pulses to prevent spillages.

•Keeping the blade (6) submerged will help to prevent spilage. Take extra care when blending hot ingredients.

Chopping: SB3020 & SB3040 only

Place blade (10) in bowl (9), then add ingredients. Fit the lid (11) and rotate it in a an anti-clockwise direction to lock it in place. Insert the motor housing (2) into the lid an rotate in an anti-clockwise direction to align the 2 arrow marks and lock it in place.

Once chopping is completed, unplug the appliance & allow the blades to stop moving.

Rotate the motor housing (2) in a clock-wise direction to remove it.

Rotate the lid (11) in a clockwise direction and lift it from the bowl. The blade should be carefully removed & placed somewhere safe and the ingredients transferred to a suitable container.

The bowl base (12) can be used as a lid to provide temporary storage of ingredients.

Mixing

•Fit the attachment to the motor housing

(2) and rotate it in an anti-clockwise direction until it locks in place.

•To remove the attachment, rotate it in a clockwise direction and pull it from the motor housing (2).

•Place the ingredients into a measuring jug or a suitable container.

•Mix the ingredients until the correct consistency is reached.

•Keeping the beater submerged will help to prevent spillages. Take extra care

-6-

when mixing hot ingredients.