Thank you for buying a Black & Decker paper shredder. Black & Decker pape r shredders
have become the benchmark for innovation, performance and quality to protect ag ainst
identity theft. We have taken great care in designing and engineering a product to meet
and exceed your needs.
To ensure years of safe, efficient performance, please re ad these important product usage and safety ins tructions.
WARNING ICONS: The icons on top of the shredder warn the user of the potential
dangers if the shredder is used improperly.

Setup

1. Optional castors are provided for product mobility. To attach, align each castor post (9) with a respective hole on the bottom of the unit. Push each castor down into the hole until it clicks into place. (Product will function without castors.)2. Plug power cord into outlet. Turn master power switch (1) into the “On” position (“—”). This switch is located on the side of the unit.3. Raise Auto Feed Tray (2) into the upright position until you hear it lock into place.4. When green POWER light (3) is on and all red error lights are off, the shredder is ready for use.
Operation
Only one shredder slot can be used at a time. Attempting to use two slots at the same timewill cause the shredder to stop and the red Over Load light to illuminate.
TO USE AUTO FEED,
place a stack of up to 75 sheets of paper into the auto feed tray (2). Theshredder will beep for 3-5 seconds as it senses the load in the tray. No further action isnecessary.
Please note:
- All paperclips and staples must be at the top of the paper (furthest away from
the shredder opening).
- Do not insert additional paper into the Auto Feed tray when it is already in use.
TO USE MANUAL FEED, insert up to 6 sheets of paper into the manual feed slot (4).
TO SHRED CDS/DVDS OR CREDIT CARDS, insert objec t into the front slot (5).
TO EMPTY BIN, turn the master power off (“O”) using the master power switch (1) and
remove the bin. Replace bin once empty and turn power switch to On (“—”) to continue
shredding.
TO USE MANUAL REVERSE OR FORWARD, hold the reverse or forward button (6) down for
the shredder to continue shredding in the desired mode.
Changing between reverse and forward will result in a 2-3 second delay as the blades
change direction.
To clear a paper jam, see Troubleshooting section.
WARNING: Hazardous moving parts . Keep fingers and other bod y parts away.
WARNING: To reduce risk of fire, electrical shoc k or injury:
NEVER allow children to operate a paper shredder, even under a dult supervision.
A paper shredder is NOT a toy.
DO NOT use flammable synthetic oil, petroleu m-based products or ae rosols of any kind
on or near product at any time.
DO NOT operate any electrical product with a da maged cord.
AVOID getting jewelry, hair or loose clothing too close to feed slot as serious injury can occur.
DO NOT handle plug or product with wet hands.
ALWAYS keep children and pets away from the shredder.
ALWAYS unplug shredder when not in use.
DO NOT attempt to feed more sheets of paper than sp ecified on the feeder.
DO NOT attempt to shred materials other than paper or credi t cards.
ALWAYS empty the wastebasket prior to becoming full.
DO NOT place shredder near heat or water source.
DO NOT open shredder head to attempt repair: It coul d expose you to electric shock an d
will void your warranty.
ALWAYS secure your shredder to studs when mounting on the wall.
The socket-outlet shall be installed near the equi pment and shall be easily accessible.
The Following Are Important Safety Instructions.
Read All Instructions Before Using.

WA R N I N G

KEEP OUT OF REACH OF CHILDREN
Customer Service
Black & Decker has a toll-free help line for customers living in the United States
and Canada if you have any questions regarding our product. Our customer service phone
number is 1-800-297-5028 or visit our website at www.blackanddeckershr edders.com.
Product Information
Sheet capacity: Auto Feed tray = 75 sheets up to 8.5” wide
Manual Feed slot = 6 sheets up to 8.5” wide
One folded sheet of paper equates to 2 sheets of paper.
Credit card, CD/DVD = 1 at a time
Paper shred size: .12” x .35” (3mmx9mm)
Voltage: 120
Maximum run time: 30 minutes
Cool down time: 45 minutes
INDICATOR LIGHTS:
• POWER – indicates that the shredder is on. The shredder will not operate when
the green power light is off.
• BIN FULL – indicates that the bin is full. The shredder will not operate when the
bin is full.
• OVER HEAT – indicates that the shredder needs to cool down before further
operation. The run time for this shredder is 30 minutes, with a 45 minute cool
down.
• OVER LOAD – indicates that there is too much paper in the shredder slot. The
shredder will stop shredding and then automatically reverse if there is an
overload. Clear the paper and then insert the allowable number of sheets. (See
troubleshooting for clearing the paper.) Light will aslo illuminate if two shredder
slots are used simutaneously.
• CHECK LOCK– indicates that the toggle lock (10) is in the open position. Turn the
toggle counterclockwise to the locked (horizontal) position. The toggle must be
in the locked position for the shredder to operate.
This product is designed to shred paper, staples, small paper clips, credit cards, CDs and
DVDs. It is not intended to shred large paper clips, continuous forms, adhesive labels,
transparencies, newspaper, cardboard, sealed envelopes, folded paper, or or any plastic
other than credit cards. Using it for these purposes is likely to cause irreparable damage.
Manual
Feed
Slot
Auto Feed Tray/Safety Shield
4
5
3
2
6
1
8
Indicator Lights
Master Power Switch
Reverse/Forward
Buttons
9
Viewing Window
Pull Out Bin
Castors (optional)
CD/DVD &
Credit Card
Slot
5On/Off
Button
10 Toggle lock
7
NO
FASTENERS
NO FLAMMABLE
CLEANING AGENTS
KEEP
CHILDREN AWAY
NO LOOSE
CLOTHING
NO FINGERS
OR HANDS
NO
HAIR
®® ® ®
SKU #BD-AF7500 SKU #BD-AF7500 SKU #BD-AF7500SKU #BD-AF7500
No filled envelopes Unfold paper Load sensing
takes 3 seconds
Staples at
top of page