Black & Decker WLBFHB Operating The Unit, Battery Recycling, Recharging The Unit, The RBRC Seal

90549415 01 WLBFHB.QXP 6/9/09 2:36 PM PAGE 7

OPERATING THE UNIT

Position the unit as desired.

•Press the ON/LOW/HIGH switch one time for high brightness power saving setting.

•Press the switch a second time for low brightness setting.

•Press the switch a third time to turn light off.

USING THE HANGING HOOK

The flexible hanging hook (1) allows you to position the Bright Bar™ for convenient, hands-free operation as shown in figure B and B1.

Insert the charging/power adapter plug	C
into the charging/power port as shown in
figure C. Insert the plug end into a
standard 120 Volt 60Hz outlet. The red
Charging Indicator LED (6) will light to	6
indicate the unit is charging (figure C).
CAUTION: When disconnecting the
charger / power adapter from the light,
be sure to unplug the charger from the
outlet first, then disconnect the charger
cord from the light.

B

B1

Notes: Charge or power this unit ONLY with the originally supplied Class 2 transformer. Consult manufacturer for replacement.

Battery Recycling

Battery is not user serviceable. Return this light to a

Black & Decker Authorized Service Center to recycle the battery.

WARNINGS: TO REDUCE THE RISK OF INJURY / EXPLOSION

CAUTION: TO REDUCE THE RISK OF PROPERTY DAMAGE:

•When hanging hook is in use, do not shake light.

•When light is hung by the hanging hook, do not shake the light or object that it is hanging from. Do not hang the light from any electrical wires or anything that it is not secure.

•Only use the hanging hook for hanging the Bright Bar™. The hanging hook is not intended to support additional weight. Do not attach or hang anything additional to the light or risk of breakage may occur.

RECHARGING THE UNIT

IMPORTANT: This unit is delivered in a partially charged state. Fully charge unit for 24 hours before using for the first time.

7

• Do not dispose of product in fire as batteries inside this product may explode or leak.

• Do not expose the unit containing a battery to fire or intense heat as it may explode.

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel-metal hydride battery (or battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have already been paid by Black & Decker. In some areas, it is illegal to place spent nickel-metal hydride batteries in the

8