Using the spray button
The spray feature can be used at any
temperature setting when either steam or
dry ironing.
• Make sure that there is water in the
tank.
• Press the button (1) several times to
activate the pump while you are ironing.
Using the self-clean button
The self-clean function must be used
before using the appliance for the first time
and then regularly to remove scale.
• Fill the tank (10) to the maximum filling
level (9).
• Set the temperature control dial (4) to
the max position.
• Plug the appliance in and switch on.
• Allow the appliance to heat up until the
heating light (5) switches off and then
on again.
• Unplug the appliance and hold it
horizontally over the sink.
• Press the self-clean button (7).
Hot water and steam will come out of the
vents. Impurities and scale will be washed
away.
• Move the iron backwards and forwards
while this is happening.
• Release the self-clean button.
• Stand the appliance upright on its heel.
• Plug the appliance in and switch on.
• Iron an old cloth or towel to dry the
soleplate.
Hints for optimum use
• Sort the articles to be ironed according
to the fabric. Start ironing with the
fabrics requiring the lowest heat setting.
• The appliance can be used as a dry iron
even if there is water in the tank. Do not
fill the tank with water if the appliance is
to be used as a dry iron for an extended
period.
• Avoid ironing over zippers, rivets on
jeans etc. as they will scratch the
soleplate.
Cleaning and storage
Warning! Before cleaning and storing,
unplug the appliance and allow it to cool
down.
• Pour out any remaining water after each
use by tilting the appliance forward.
• Clean the body with a soft damp cloth.
• Wipe scale and other residues off the
soleplate with a damp cloth.
• Store in an upright position. The cord
can be wound around the cord storage
(8).
Technical Data
English
-7-
X810 X750
Voltage V 220-240~ 220-240~
Power input W 1800 1400
Weight kg 1.54 1.54