Maintenance 7-3

Cleaning the Server

For daily cleaning, wipe the external surfaces of the server with a dry soft cloth. Follow the procedure below if stains remain on the surfaces:

IMPORTANT:

„To avoid altering the material and color of the server, do not use volatile solvents such as thinner and benzene to clean the server.

„The power receptacle, the cables, the connectors on the rear panel of server, and the inside of the server must be kept dry. Do not moisten them with water.

1.Make sure that the server is off-powered (the POWER/SLEEP lamp goes off).

2.Unplug the power cord of the server from a power outlet.

3.Wipe off dust from the power cord plug with a dry cloth.

4.Soak a soft cloth in neutral detergent that is diluted with cold or lukewarm water, and squeeze it firmly.

5.Rub off stains on the server with the cloth prepared in Step 4.

6.Soak a soft cloth in water, squeeze it firmly, wipe the server with it once again.

7.Wipe the server with a dry cloth.

8.Wipe off dust from the fan exhaust opening on the rear of the server with a dry cloth.

Page 229
Image 229
NEC 140Rc-4 manual Cleaning the Server