3-22 Setting Up Your Server

Removal Procedure

More than one person should remove the server from the rack.

CAUTION

Observe the following instructions to use the server safely. Failure to follow these instructions may result in death or serious personal injury. See pages 1-3 to 1-8 for details.

Do not lift the server only by a single person.

Do not pinch your finger with mechanical components.

Note high temperature.

Do not pull out a device from the rack if the rack is unstable.

Do not leave more than one device being pulled out from the rack.

1.After confirming that the server is off-powered, remove the power cords and all interface cables connected to the server.

2.Loosen two screws with which the cable arm is fixed to the rear of the server to remove the cable arm from the server.

Screws

Cable arm

 

3.Release the security lock to remove the front bezel.

Page 94
Image 94
NEC 140Rc-4 manual Removal Procedure, More than one person should remove the server from the rack