6-22 Installing and Using Utilities

7.Select the [Properties] command from the popup menu displayed by clicking the right mouse button on the server name to display the [Properties] dialog box.

8.If the [Properties] dialog box appears, provide the following setting: <[ID] page>

Connection Type: LAN <[Alert Notifications] page>

Remove the check of [Use Default Settings] and check the [RESET] of [Activate].

9.Select the [Open Remote Console] command from the popup menu displayed by clicking the right mouse button on the server name to start the [MWA Remote Console].

10.Select the [Action at Remote Console Connect] command from the popup menu displayed by clicking the right mouse button on the server window to display the [Action at RomPilot Connect] dialog box. Then select [Go MWA mode].

11.Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server. Insert the floppy disk storing the configuration information file into the floppy disk drive.

Page 218
Image 218
NEC 140Rc-4 manual Installing and Using Utilities