NEC 140Rc-4 manual Assembling the RACK-MOUNT System

3-6 Setting Up Your Server

ASSEMBLING THE RACK-MOUNT SYSTEM

This subsection provides the instructions for the rack-mount server unit into a standard EIA 19-inch rack cabinet.

This subsection also describes the removal procedures for the rack mount server unit from the 19- inch rack cabinet.

WARNING

Observe the following instructions to use the server safely. Failure to follow these instructions may result in death or serious personal injury. See pages 1- 3 to 1-8 for details.

■Do not use any rack which does not conform to the relevant standard.

■Disconnect the power cord(s) before installing or removing the server.

CAUTION

Observe the following instructions to use the server safely. Failure to follow these instructions may cause a fire, personal injury, or property damage. See pages 1-3 to 1-8 for details.

■Do not leave more than one device being pulled out from the rack.

■Do not lift the server only by a single person.

■Always install the server in the specified place.

■Do not install the server on the rack leaving the cover removed.

■Do not pinch your finger with mechanical components.