Event logs in using Snmp Service in Windows Server

About System Log when re-starting the system on Windows Server 2003

Type: Warning

Source: E100B

Event ID: 4

Description: Adapter Intel(R) PRO/100 Network Connection: Adapter Link Down

→When re-starting the system without connecting the network cable, this log may be found in system event log.

But this has no effect on the behavior of LAN driver.

Confirm that the system is connected with the LAN cable properly.

If 100Base LAN port is not utilized, disable 100Base LAN on device manager or disable it on BIOS configuration. Then, the log will not be registered.

Event logs in using SNMP Service in Windows Server 2003

Event Type:	Warning
Event Source:	EvntAgnt
Event Category:	None
Event ID:	1015
Description:	TraceLevel parameter not located in registry;
	Default trace level used is 32.
Event Type:	Warning
Event Source:	EvntAgnt
Event Category:	None
Event ID:	1003
Description:	TraceFileName parameter not located in registry;
	Default trace file used is .

→The system will not be affect by these event logs. SNMP will not be affected either, so that you can ignore these logs.