5-6 Installing the Operating System with Express Setup

Creating Partition Size

The minimum size for the partition that the system is to be installed can be calculated from the following formula.

Size necessary to install the system + Paging File Size + Dump File Size Size necessary to install the system = 2900MB

Paging File Size (Recommended)

= Installed Memory Size × 1.5

Dump file Size

= Installed Memory Size + 12MB

IMPORTANT:

„The above paging file size is necessary for collecting debug information (memory dump). If you set the default value of paging file size smaller than the 'recommended' value, the accurate debug information (memory dump) may not be collected.

„The maximum paging file size which can be set on one partition is 4095MB. If the above paging file size exceeds 4095MB, specify 4095MB for the paging file size.

„The dump file size for the system with more than 2GB memory mounted is '2048MB + 12MB'.

„If you install any application program or the like, add necessary space to the partition to install these programs.

For example, if the mounted memory size is 512MB, the minimally required partition size will be calculated by the above formula as follows:

2900MB + (512MB * 1.5) + (512MB + 12MB) = 4192MB.

Re-installing to the hard disk which has been upgraded to Dynamic Disk

You cannot re-install Windows Server 2003 with the current partition of the hard disk upgraded to Dynamic Disk kept remained.

If you want to keep the current partition remained, see Appendix D to re-install the system.

Disk Configuration (Concerning the area displayed as "MAINTE_P")

In disk area, an area displayed as "MAINTE_P" may exist. This area is maintenance partition for saving configuration information and utilities. Do not delete the area.

Page 162
Image 162
NEC 140Rc-4 manual Creating Partition Size