4-26 Configuring Your Server

Option

Parameter

Description

Your Setting

Set Supervisor

Up to seven

Press Enter to display the supervisor

 

Password

alphanumeics

password input screen. This password

 

 

 

enables all the SETUP menus to be

 

 

 

accessed. This setting can be done only

 

 

 

on login with the password input of

 

 

 

"Supervisor" at start of SETUP.

 

Password on boot

[Disabled]

Specify whether the passwords are

 

 

Enabled

entered or not on booting. At first the

 

 

 

supervisor password must be set. If the

 

 

 

supervisor password is set and this option

 

 

 

is invalid, BIOS determines that a user is

 

 

 

booting.

 

Fixed disk boot

[Normal]

Prevents data from being written to hard

 

sector

Write Protect

disks.

 

Secure Mode

2 min

Specify the period from no input from the

 

Timer

5 min

keyboard or mouse to the point at which

 

 

10 min

the system enters into the secure mode.

 

 

20 min

 

 

 

1 hr

 

 

 

[2 hr]

 

 

Hot Key

[L]

Specify the key with which the secure

 

(CTRL+ALT+)

 

mode is started. Press the selected key

 

 

 

with the Ctrl and Alt pressed to start the

 

 

 

secure mode.

 

Secure Mode Boot

[Disabled]

Specify whether the server is operated in

 

 

Enabled

the secure mode at the start of the server.

 

Video Blanking

[Disabled]

Specify whether the monitor is

 

 

Enabled

disconnected if the server is entered into

 

 

 

the secure mode.

 

Floppy Write

[Disabled]

Specify whether data write to the floppy

 

Protect

Enabled

disk inserted into the floppy disk drive is

 

 

 

enabled or disabled in the secure mode.

 

Power Switch

[Disabled]

Specify whether the power switch is

 

Inhibit

Enabled

enabled or disabled. If this item is set to

 

 

 

"Enabled," the power cannot be turned off

 

 

 

by using the POWER switch (including the

 

 

 

forced shutdown). The system cannot

 

 

 

also enter the power saving mode by

 

 

 

pressing the SLEEP switch.

 

 

 

[

]: Factory-set

NOTE: The Secure Mode is used to restrict access from unauthorized users. In the Secure Mode, the POWER switch, SLEEP switch, RESET switch, keyboard and mouse are disabled. The lamps on the keyboard flash in order from the ScrollLock lamp, the CapsLock lamp, and the NumLock lamp. To resume server operation in the normal state from the Secure Mode, enter the user password from the keyboard and press Enter key.

Page 136
Image 136
NEC 140Rc-4 manual Ctrl+Alt+