2-32 General Description
SLEEP Switch
The SLEEP switch allows you to save almost all power of the server (power-saving mode or sleep
mode).
NOTE: To use the SLEEP switch, an OS supporting the sleep feature
is required. (Available for Windows 2000.)
Press the SLEEP switch on the front of the server to place the server in the power-saving mode.
(The POWER/SLEEP lamp blinks.) In the power-saving mode, the server retains the memory data
and the status of the previous operations.
To resume the original state, press the POWER switch. (It may take a little time to resume the
original state.)
NOTE: The operational level in the power-saving mode depends on
the OS in use. (Available for Windows 2000.)
IMPORTANT: Do not change system configuration while turning into
the power-saving mode or in the power-saving mode. Otherwise, you
may fail to resume the original state.
POWER/SLEEP lamp
SLEEP switch