NEC 140Rc-4 manual Installing and Using Utilities

Installing and Using Utilities 6-23

12.Turn off the power of the server and then on again to restart the system. After a single reboot, MWA Remote Console displays the main menu of NEC EXPRESSBUILDER and you can operate tools on the server through the management PC.

NOTE: The main menu appears without rebooting it when the setting in the configuration information file is already established.

13.When the main menu appears on the screen of the management PC, remove the floppy disk from the floppy disk drive.

14.Select the [Properties] command from the popup menu displayed by clicking the right mouse button on the server name to display the [Properties] dialog box.

Execute [Connection Check] on the [ID] tab page.

15.When you want to operate other tools, remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive and turn off and on the server from MWA Remote Control Manager to start other tools.

Select [Power control] command from the popup menu displayed by clicking the right mouse button on the server name. You can turn off/on the server.

IMPORTANT: When the Operation with remote console is end, remove the check of [RESET] of [Activate] in thr [Properties] dialog box and reboot the server.