NEC 140Rc-4 manual Empty Bus Default Speed

4-18 Configuring Your Server

Empty Bus Default Speed

Selecting " Empty Bus Default Speed " on the Hot-plug PCI Control submenu shows the following screen.

See the table blow for the item.

Option	Parameter	Description	Your Setting
PCI Slot 5-6	[PCI 33MHz]	Selects the types of PCI board and
PCI Slot 7-8	PCI 66MHz	frequency to be installed to the PCI
	PCI-X 66MHz	slots 5 – 6 or 7 – 8.
	PCI-X 100MHz	The parameter must be selected
		before installing the PCI board with
		hot-plug (This option is ignored and
		appropriate parameter of the installed
		board is applied to the slot by the
		system after installing the board and
		rebooting the system.).
		[	]: Factory-set