Troubleshooting 8-47

RESETTING THE SERVER

„If the server halts before starting the OS, press and hold Ctrl and Alt and press Delete. This restarts the server.

„Pressing the RESET switch on the front panel reboots the server.

RESET switch

IMPORTANT: Resetting the server clears the DIMM memory and the data in process. To reset the server when it is not frozen, make sure that no processing is in progress.

FORCED SHUTDOWN

Use this function when an OS command does not shut down the server, the POWER switch does not turn off the server, or resetting does not work.

Press and hold the POWER switch on the server for at least four seconds. The power is forcibly turned off. To turn on the power back again, wait approximately 10 seconds after turning off the power (forced shutdown).

Press and hold the POWER switch at least 4 seconds.

IMPORTANT: If the remote power-on function is used, cycle the power once to load the OS, and turn off the power again in the normal way.

Page 285
Image 285
NEC 140Rc-4 manual Resetting the Server, Forced Shutdown