Configuring Your Server 4-31Console RedirectionSelecting "Console Redirection" on the Server menu shows the following screen.
See the table below for the items.
Option Parameter Description Your Setting
Serial Port
Address
[Disabled]
On-Board Com A
On-Board Com B
Selects the port to be used as the
redirection port. The parameters
specified in I/O device configuration
submenu is used as address and
interrupt.
ACPI Redirection
Port
[Disabled]
On-Board Com A
On-Board Com B
Specify the I/O port address or
interrupt level used in ACPI headless
console redirection.
If [Disabled] is selected, console
redirection feature is disabled.
Baud Rate [9600]
19.2k
38.4k
57.6k
115.2k
Specify the baud rate used for the
interface with successive hardware
consoles.
Flow Control None
XON/XOFF
CTS/RTS
[CTS/RTS+CD]
Specify the flow control method.
Console Type PC ANSI
[VT100+]
VT-UTF8
Specify the console type.
Remote Console
Reset
[Disabled]
Enabled
Specify whether the reset from remote
console is enabled or disabled.
[ ]: Factory-set