NEC 140Rc-4 manual Scsi Bios ~ SCSISelect ~, Using SCSISelect Utility

Configuring Your Server 4-35

SCSI BIOS ~ SCSISelect ~

The SCSISelect utility is provided to configure the SCSI controller on the baseboard (or the SCSI controller on an optional board). This utility may be started with a simple key operation while POST is in progress and requires no specific start-up disk.

Using SCSISelect Utility

Use the SCSISelect utility mainly to set the transfer speed of connected SCSI devices. The SCSI devices include those installed in the 5.25-inch device bays and backup devices, such as an external DAT and MO, but not hard disks.

IMPORTANT: SCSI configuration must be made on a per-SCSI controller basis with a utility. The server contains one SCSI controller. When you added optional SCSI controllers, you need to make configuration for each SCSI controller in addition to the standard internal SCSI controller. Some additional SCSI controllers may require a different utility to make changes to the configuration.