4-14 Configuring Your Server

Advanced

The Advanced menu appears if you move the cursor to the position of "Advanced."

To display a submenu, position the cursor on a selection that has a submenu (preceded by symbol ) and press Enter.

See the table below for the items.

Option

Parameter

Description

Your Setting

Boot-time

[Disabled]

Specify whether the self-diagnosis (POST)

 

Diagnostic

Enabled

running screen is displayed or not on booting.

 

Screen

 

If this item is set to "Disabled," the "NEC" logo

 

 

 

appears during POST. (Pressing Esc in the

 

 

 

status causes the screen display to be switched

 

 

 

to the POST execution screen.

 

 

 

The Boot-time Diagnostic Screen is

 

 

 

automatically enabled if the Console

 

 

 

Redirection is enabled.

 

Reset

[No]

Select "Yes" to clear the extended system

 

Configuration

Yes

configuration data area (system information

 

Data

 

stored by POST). The parameter is changed

 

 

 

to "No" after the system is booted.

 

NumLock

On

Specify whether the numlock is enabled or

 

 

[Off]

disabled on booting.

 

Memory/

[Boot]

Indicates whether POST is paused once at the

 

Processor Error

Halt

occurrence of a CPU or memory error during

 

 

 

the execution of POST.

 

 

 

When CPU error or Memory error is

 

 

 

encountered, the utility is not paused at the end

 

 

 

of POST if this item is set to "Halt" and even

 

 

 

though "POST Error Pause" of "Server" menu

 

 

 

is "Enabled".

 

 

 

[

]: Factory-set

Page 124
Image 124
NEC 140Rc-4 manual Advanced