Configuring Your Server
Security
Positioning the cursor to "Security" shows the following screen.
Selectable only when User Password is registered
If you press Enter with the selection of either "Set Supervisor Password" or "Set User Password," such a screen as shown below appears (the screen shown in the figure below appears when "Set Supervisor Password" is selected).
Specify the passwords on the dialog box. Enter each of the passwords with up to seven characters including alphanumerics and symbols.
IMPORTANT:
Set the passwords only after OS is installed.
If you forget the passwords, contact your service representative.
See the table below for the items.
Option | Parameter | Description |
| Your Setting |
Set User | Up to seven | Press Enter to display the user password |
| |
Password | alphanumeics | input screen. | For this password, |
|
|
| accessing to the SETUP menu is |
| |
|
| restricted. |
|
|
