NEC 140Rc-4 manual Main Menu

Installing and Using Utilities 6-11

NOTE: The following items of BIOS setup information will be set as shown below.

„LAN Controller 1 (10/100): [Enabled]

„	Serial Port A:	[Enabled]
	Base I/O address:	[3F8]
	Interrupt:	[IRQ 4]
„	Serial Port B:	[Enabled]
	Base I/O address:	[2F8]
	Interrupt:	[IRQ 3]
„	Serial Port Address:	[On-board COM B]
„	Baud Rate:	[19.2k]
„	Flow Control:	[CTS/RTS]
„	Console Type:	[PC ANSI]

Main Menu