NEC 140Rc-4 manual Network Driver

Models: 140Rc-4

1 400
Download 400 pages 61.79 Kb
Page 169
Image 169

Installing the Operating System with Express Setup 5-13

Network Driver

Specify the details of network driver.

Two standard network drivers that are mounted will be installed automatically, but the link speed and Duplex mode need to be specified manually.

[When PROSet is not installed]

1.The [Local Area Connection Properties] dialog box appears.

*The procedure in the case of the standard start menu

1.Click Start menu, Click [Control Panel], Click [Network Connections], and Click [Local Area Connection].

*The procedure in the case of the classic start menu

1.Click Start menu, Click [Settings] and Click [Network Connections]. The [Network Connections] dialog box appears.

2.Right-click [Local Area Connection] and click [Properties] from pop-up menu.

2.Click [Configure].

The property dialog box for network adapter appears.

3.Click the [Advanced] and specify the [Link Speed & Duplex] value the same as the value specified for HUB.

4.Click [OK] on the property dialog box for network adapter.

[When PROSet is installed]

1.The [Intel PROSet] dialog box appears.

* The procedure in the case of the standard start menu

Click Start menu, point to [Control Panel] and click [Intel PROSet].

*The procedure in the case of the classic start menu

1.Click Start menu, point to [Settings] and click [Control Panel].

2.Double-click [Intel(R) PROSet] on the [Control Panel] window.

2.Click [(Network Adapter Name)] in the list.

3.Click the [Speed] and specify the [Link Speed & Duplex Settings] value the same as the value specified for HUB.

4.Click [Apply] and click [OK].

Specify the other network driver with the same progress above. Also, add or delete any protocols and services if necessary.

You can operate the process on the property dialog box for local area network which can be appeared from [Network and Dial-up Connection].

Page 169
Image 169
NEC 140Rc-4 manual Network Driver