General Description
3.Displays the SCSI ID numbers used by the connected SCSI devices on the screen.
4.If one or more disk array controllers are installed, displays the message prompting you to start the Disk Array BIOS setup utility.
Start the utility according to the message if you need to change the settings. Refer to the manuals of the disk array controllers for details.
Without any entry, any of the following messages appears.
5.Displays the message notifying you of the detection of the CPU and the connected keyboard and mouse.
6.Displays any of the following messages. Pattern 1:
Press <ESC> to enter boot selection menu
Press <F2> to enter SETUP or <F12> to Network
Pattern 2:
Press <ESC> to enter boot selection menu
Press <F2> to enter SETUP, <F4> Service Partition, <F12> to Network
Or
Pattern 3:
Press <ESC> to enter boot selection menu
Press <F1> to resume, <F2> to enter Setup, <F12> to Network
Pattern 4:
Press <ESC> to enter boot selection menu
Press <F1> to resume, <F2> to enter Setup, <F4> Service Partition, <F12> Network
