5-32 Installing the Operating System with Express Setup
Optional Network Board Driver
If you want to utilize optional Network Board (N8104-80/86/103/111/113), confirm the versions of
driver in EXPRESSBUILDER CD-ROM and the version of driver attached to the Network board.
CD-ROM Drive Letter:\WINNT\W2K\BC11\PRO1000\WIN2K\e1000nt5.sys
CD-ROM Drive Letter:\WINNT\W2K\BC11\PRO100\WIN2K\e100bnt5.sys
If the driver attached to the Network board is old, install the driver stored in NEC
EXPRESSBUILDER CD-ROM.
Refer to the re-installation procedure described (Appendix E).
Network Driver for (N8104-103/113)
[CD-ROM Drive Letter:\WINNT\W2K\BC11\PRO1000\WIN2K]
Network Driver for (N8104-80/86/111)
[CD-ROM Drive Letter:\WINNT\W2K\BC11\PRO100\WIN2K]
Graphics Accelerator Driver
Standard graphics accelerator drivers that are mounted will be installed automatically. The
following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "Setup.exe" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K\VIDEO\setup.exe.
4. Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5. Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.