Appendix B

Other Precautions

Transfer Rate of the On-board LAN Controller

The baseboard includes the two network interface controllers.

„LAN 1 supports 10Base-T and 100Base-TX networks and a capable of full or half duplex.

„LAN 2 supports 10Base-T, 100Base-TX, and 1000Base-T networks and a capable of full or half duplex.

The both controllers can automatically detect and switch for network speed and transfer mode connected to the HUB. However, for proper network operation, specify the "Link Speed & Duplex" value the same as the value specified for HUB.

Server Management Software

The NEC EXPRESSBUILDER CD-ROM that comes with the server contains the NEC ESMPRO utility.

NEC recommends that you should install the NEC ESMPRO for effective use of the reliability enhancement features of the server.

Floppy Disk

The following describes use of the floppy disk.

Floppy disk type

The server uses 3.5-inch floppy disks. You can use the following two types of 3.5-inch floppy disks:

„2HD floppy disk (double-sided high-density track type) Stores data of 1.44MB.

„2DD floppy disk (double-sided double-density track type) Stores data of 720KB.

Shutter

 

Catching hole

Insertion direction

Head window

 

indicator

 

Label

Centering hub

Centering hole

 

Write protection

High-density media hole

 

hole

(2HD only)

Write protection switch

Front

 

Rear

Page 363
Image 363
NEC 140Rc-4 manual Transfer Rate of the On-board LAN Controller, Server Management Software, Floppy Disk, Floppy disk type