Installing Windows Server 2003 D-3
INSTALLING Windows Server 2003
Preparations for Installation
NEC EXPRESSBUILDER CD-ROM
Microsoft Windows Server 2003 Standard Edition (CD-ROM) or Microsoft Windows
Server 2003 Enterprise Edition (CD-ROM)
User's Guide
Getting Started
Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER

Creating "Windows Server 2003 OEM-DISK for NEC

EXPRESSBUILDER"

Before installing, create Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER.
NOTE: If you have already "Windows Server 2003 OEM-DISK for
NEC EXPRESSBUILDER" for NEC Express5800 Server which you
are going to install Windows Server 2003, you do not need to create it
again.
You can create Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER with the
following two procedures.
Create from the menu which appears when running NEC Express5800 Server with NEC
EXPRESSBUILDER.
If you have only NEC Express5800 Server to create Windows Server 2003 OEM-DISK
for NEC EXPRESSBUILDER, use this procedure.
If Windows Server 2003 or Windows NT 4.0 can be operated on NEC Express5800 Server,
you can use the other procedure described later.
Follow the steps below.

1. Prepare one 3.5-inch floppy disk.

2. Turn on your NEC Express5800 Server.

3. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive of the server.

4. Press the RESET switch or press Ctrl, Alt and Delete to reboot the server .(You may also

turn off and then on again to reboot the server.)
The system will boot from the CD-ROM and NEC EXPRESSBUILDER starts.

5. Select [Create Support Disk] from [Tools].

6. Select [Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER] from [Create

Support Disk] menu.