Upgrading Your Server 9-47
DIMM
Install the additional DIMM (Dual Inline Memory Module) to the DIMM socket on the baseboard in
the server. The memory board is provided with 12 DIMM board slots.
The memory board contains 12 sockets in which DIMMs are installed. Four 256MB DIMMs are
normally installed in DIMM group #1. (The DIMMs normally installed may be replaced.)
DIMMs are installed on the sockets in the ascending order of DIMM socket numbers in the unit of
four modules.
NOTE: Up to 24GB of memory (2GB DIMM x 12) can be installed.
IMPORTANT:
The DIMM is extremely sensitive to static electricity. Make sure to
touch the metal frame of the server to discharge static electricity
from your body before handling the DIMM. Do not touch the
DIMM terminals or on-board parts by a bare hand or place the
DIMM directly on the desk. For static notes, see the section "Anti-
static Measures" described earlier.
Make sure to use the DIMM authorized by NEC. Installing a third-
party DIMM may cause a failure of the DIMM as well as the server.
Repair of the server due to failures or damage resulted from
installing such a board will be charged.
DIMM group #3
DIMM group #2
DIMM group #1
DIMM group #3
DIMM group #2
DIMM group #1