NEC 140Rc-4 manual Re-install the Network Driver, Installing Scsi Controller Driver

Installing Windows Server 2003 D-11

NOTE: We recommend you to add "Network Monitor" at "Adding Services".

"Network Monitor" can monitor frames (or packets) sent or received by a computer on which "Network Monitor" is installed. This is an effective tool for analyzing network faults.

For information about the installation procedure, see Chapter 6.

Re-install the Network Driver

The network driver will be installed automatically.

Installing SCSI Controller Driver

If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:

1.Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools] → [Computer Management].

2.Double click the SCSI Controller driver which Device Manager lists as unknown device.

3.Click [Update Driver].

4.When the "Update Device Driver Wizard" appears, select "Install from a list or specific location [Advanced]" and click [Next].

5.Select "Don't search. I will choose the driver to install" and click [Next].

6.Click [Have Disk..].

7.Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].

8.Specify the following driver and click [Next].

–[INITIO INI-A10XU2W PCI SCSI Controller](When N8103-65F board is installed.)

–[Adaptec SCSI Card 29320ALP - Ultra320 SCSI](When N8103-75 board is installed.) The installation of the driver is completed.

Restart the system according to the message appeared on the screen.