NEC 140Rc-4 manual Starting the Off-line Maintenance Utility

Troubleshooting 8-45

Starting the Off-line Maintenance Utility

The Off-line Maintenance Utility may be started in the following ways.

„From the CD-ROM

Set the NEC EXPRESSBUILDER CD-ROM in the CD-ROM drive and reboot the system.

After the menu is displayed on the screen, select "Tools" - "Off-line Maintenance Utility". The Off-line Maintenance Utility program starts from the CD-ROM.

„From the floppy disk

Set the Off-line Maintenance Utility Bootable FD in the floppy disk drive and reboot the system.

The Off-line Maintenance Utility program starts from the boot disk.

The Off-line Maintenance Utility Bootable FD is created by selecting "Tools" - "Create Support FD" on the NEC EXPRESSBUILDER.

„Manual start (by pressing F4)

When the Off-line Maintenance Utility is installed, press F4 while the start-up screen of the server is on screen. The Off-line Maintenance Utility starts from the hard disk.