NEC 140Rc-4 manual Installing the Operating System with Express Setup

Installing the Operating System with Express Setup 5-29

NOTES:

„If you click [Cancel] in [Basic Information] screen, the screen will go back to select the Setup File. [Cancel] exists only in [Basic Information] screen.

„If you click [OK] in [Role of Computer] screen, the setup automatically selects default value for the later specification to continue the installation.

When all the specification has completed, the system reboots automatically.

9.Copy the modules for the optional mass storage driver.

If you want to install the optional mass storage driver, insert the floppy disk attached to mass storage driver into the floppy disk drive and follow the message to operate the installation.

10.Follow the message and take NEC EXPRESSBUILDER CD-ROM and Configuration Diskette out of CD-ROM drive, and floppy disk drive, and insert Windows 2000 CD- ROM into CD-ROM drive.

[Software License Agreement] screen appears.

11.Read the contents carefully and click [I agree.] or press F8 if you do agree. If you do not agree, click [I disagree] or press F3.

IMPORTANT:

„If you do not agree to this agreement, the setup terminates and Windows 2000 will not be installed.

„If "NetWare Gateway (and Client) Service" is specified to install, the window to specify the details of "NetWare Gateway (and Client) Service" pops up on the first logon. Specify the appropriate value.

12.If you selected [Apply] on [Apply Service Pack] at Basic Information, follow the procedure below.

1)Follow the message to take Windows 2000 CD-ROM out of CD-ROM drive.

2)Follow the message to insert Windows 2000 Service Pack 1 or later into CD-ROM drive.

Windows 2000 and the specified application will be installed automatically and logon to the system. Install and configure the device drivers.

Now the Setup using Express Setup has completed.