NEC 140Rc-4 manual Installing Windows Server

D-8 Installing Windows Server 2003

10.If the optional board is installed, select the proper SCSI Adapter and press Enter.

– MegaRAID SCSI 320-2 RAID Controller Driver (When N8103-81F board is installed.) Continue performing tasks according to the subsequent messages that appear.

11.Update the system.

12.Install the driver and make detailed settings.

„SCSI controller (N8103-56F)

If your system has a controller (N8103-56F), system error will occur during the upgrade installation to Windows 2003.

Disconnect SCSI controller and restart the upgrade installation from the beginning.

„If PROSet is already installed, uninstall the PROSet before upgrading.

If the teaming function is enabled, disable the function before uninstalling PROSet.

„During upgrade installation, [Disk Insert] dialog box may appear. If it appears, click Cancel.

„When upgrade installation is completed,[Device Driver Wizard] dialog box may appear. If it appears, click Cancel, then update the system.