9-58 Upgrading Your Server

Processor (CPU)

The processor board includes four Intel Xeon MP sockets (one processor is mounted at the factory).

Processor (CPU #3)

Processor (CPU #4)

Processor (CPU #2)

Processor (CPU #1)

IMPORTANT:

„The CPU is extremely sensitive to static electricity. Make sure to touch the metal frame of the server to discharge static electricity from your body before handling the CPU. Do not touch the CPU pins by a bare hand or place the CPU directly on the desk. For static notes, see the section "Anti-static Measures" described earlier.

„When using the server with the single processor configuration, CPU must be mounted on the Processor #1.

„Install the CPU in the numerical order (see figure above).

„To maintain the cooling effect in the server, install the dummy sponge onto the processor #3 and #4 sockets when the CPU is not installed to these sockets.

NOTE: If the different revision of the processor is installed in the multiprocessor system, Windows 2000 logs the following information every startup. If this message is logged, it is no problem for operation.

Page 344
Image 344
NEC 140Rc-4 manual Processor CPU