NEC 140Rc-4 Error Message during Disk Array Configuration, Problems with Master Control Menu

8-36 Troubleshooting

Error Message during Disk Array Configuration

Refer to the manual that comes with the disk array controller for any trouble occurred on disk array in this system.

Problems with Master Control Menu

The master control menu fails to appear:

Is your system Windows NT 4.0 or later, or Windows 95 or later?

→The Master Control menu is supported by Windows NT 4.0 and Windows 95. Is Shift pressed?

→Setting the CD-ROM with Shift pressed down cancels the Autorun feature. Is the system in the proper state?

→The menu may not appear depending on the system registry setting or the timing to set the CD-ROM. In such a case, start the Explorer and run \MC\1ST.EXE in the CD-ROM.